To reduce noise in power cords from airborne RF and from conducted RF on the AC power line.
APPLICATION
Power cords for Audio CD, DVD, and SACD players, transports and DACs.
Power cords for preamps and amplifiers.
Power cords for all Home Theater components, including projectors and satellite receiver boxes.
GOAL
To reduce the noise generated by electronics back into the AC line.
APPLICATION
Power cords for video monitors, TVs, tuners, receivers, and digital components.
Power cords for fax machines, computers, peripherals, and printers.
GOAL
To reduce noise and brightness in cables carrying an audio or video signal, or to reduce noise in a projected video image.
APPLICATION
Audio interconnects, speaker wires, and digital cables.
Audio and video cables for Home Theater components.
Video cables for computer monitors and TVs.
Power cords for video projectors.
GOAL
To reduce power line RF from other sources.
APPLICATION
Power cords for refrigerators and air conditioners.
Power cords for computers and computer monitors.
Power Wraps come in three sizes:
- .375" diameter, 12-inch long Power Wrap
- .56" diameter, 12-inch long Power Wrap
- .328" diameter, 6-inch long All Clear (sold in pairs)
RECOMMENDED USES
- Power Wraps are recommended for 3 to 7 foot power cords.
- For AC power cord lengths over 7 foot, use two Power Wraps per cord end-to-end.
- Power Wraps are recommended for Digital cables due to the high level of digital noise on the cable.
- All Clears come in sets of two so they can be used on separate left- and right-channel electronics.
- All Clears are recommended for 1 and 1.5 meter audio and video cables and Power Wraps for longer cables.
- Two Power Wraps or All Clears may be placed end-to-end on a single power cord to provide additional suppression.
Theory of Operation
Article Mentions and Reviews
Installation and tuning instructions for Power Wraps
Power Wraps home page
Highwire Audio home page
Manufactured by All Clear Products, Inc.